Skip to content

Marine · PHOENIX L4

JOHN DEERE MARINE PHOENIX L4 — Stage 1 Solutions

Verified solutions from the library for JOHN DEERE MARINE PHOENIX L4. Upload your file: the ECU is identified from the file itself and you see the applicable operations without spending credits.

Free pre-checkECU recognition and the options that work on your file, without spending credit
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Performance

Expected Stage 1 gains

+15–25%power gain
+15–25%torque gain
Petrol (turbo engines)engine type

This is an expected range; the real figure depends on the vehicle's hardware and the file. Compatibility is checked again when you upload.

Operations

Available operations for this ECU

ECU familyPHOENIX L4BrandJOHN DEERE MARINE

Operations

JOHN DEERE MARINE PHOENIX L4 operations in detail

JOHN DEERE MARINE PHOENIX L4 Stage 1

A software calibration that gets more from the engine's power and torque maps within safe limits; RemapCloud prepares it for the exact file you read. Stage 1 is available for JOHN DEERE MARINE PHOENIX L4 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Petrol (turbo engines): +15–25% power gain, +15–25% torque gain.

Stage 1: all supported ECU families

Brands

Other brands using this ECU

Explore

Other ECUs for JOHN DEERE MARINE

How it works

How it works

Upload

Upload the original ECU read

Select

The software identifies the unit from the file and shows only the options that work on it

Process

The operation you choose is prepared and checked before delivery

Download & Checksum

Credit is used only when a result is delivered. Checksum runs in a separate tab.

A module job costs 1 credit and Stage 1 costs 3 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 4 credits; each further module +1 credit.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.

Upload your file for free — see which operations work

Questions

Frequently asked questions

Can Stage 1 be done on a JOHN DEERE MARINE PHOENIX L4?

Yes. The library holds a verified Stage 1 solution for JOHN DEERE MARINE PHOENIX L4. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Which brands use the PHOENIX L4 ECU?

Besides JOHN DEERE MARINE it is also found on JOHN DEERE, CLAAS; the solution list for each brand is on its own page.

How many credits does a JOHN DEERE MARINE PHOENIX L4 job cost?

A module job costs 1 credit and Stage 1 costs 3 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 4 credits; each further module +1 credit.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account