Truck · Bus · BOSCH EDC MS6.1
Verified solutions from the library for MAN BOSCH EDC MS6.1. Upload your file: the ECU is identified from the file itself and you see the applicable operations without spending credits.
Performance
This is an expected range; the real figure depends on the vehicle's hardware and the file. Compatibility is checked again when you upload.
Operations
ECU familyBOSCH EDC MS6.1
BrandMANOperations
A software calibration that gets more from the engine's power and torque maps within safe limits; RemapCloud prepares it for the exact file you read. Stage 1 is available for MAN BOSCH EDC MS6.1 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Diesel (heavy-duty): +15–25% power gain, +20–30% torque gain.
Stage 2 remap / Stage 2 tune software for hardware-upgraded engines: upload, pick, download. Stage 2 is available for MAN BOSCH EDC MS6.1 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.
Stage 3 remap / Stage 3 tune software for extensive hardware changes such as a bigger turbo. Stage 3 is available for MAN BOSCH EDC MS6.1 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.
Explore
How it works
Upload the original ECU read
The software identifies the unit from the file and shows only the options that work on it
The operation you choose is prepared and checked before delivery
Credit is used only when a result is delivered. Checksum runs in a separate tab.
A module job costs 1 credit and Stage 1 costs 3 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 4 credits; each further module +1 credit.
Missing the operation you need? Leave a request
Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.
Upload your file for free — see which operations workQuestions
Yes. The library holds a verified Stage 1 solution for MAN BOSCH EDC MS6.1. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.
A module job costs 1 credit and Stage 1 costs 3 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 4 credits; each further module +1 credit.
Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.
Create free account