Skip to content

Operation

Torque Limiter Off Software: Torque Limiter Removal by ECU Family

The factory torque-limiting maps are re-tuned in the software.

Upload your file freeSupported ECUs
Car
Free pre-checkECU recognition and the options that work on your file, without spending credit
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Benefits

What changes with Torque Limiter Off

Vehicle types it works on

Car

Credits

A module job costs 1 credit (any number of modules in one job); Stage 1 costs 2 credits for cars/bikes and 3 credits for trucks, tractors and construction machines. With Stage 1, each module you add costs +1 credit (Stage 1 + 1 module: 3 credits for cars/bikes, 4 credits for trucks, tractors and construction machines). No credit is charged for a job without a result.

Delivery rule

The solution is verified at byte level as it is applied; if one of your selected operations cannot be applied, the file is not delivered and the credit is refunded.

Chiptuning guide: what is Torque Limiter Off? →

How it works

How it works

Upload

Upload the original ECU read

Select

The software identifies the unit from the file and shows only the options that work on it

Process

The operation you choose is prepared and checked before delivery

Download & Checksum

Credit is used only when a result is delivered. Checksum runs in a separate tab.

ECU families

Every ECU family this operation works on

Bosch
MD1CS069

Brand + ECU

Torque Limiter Off by brand and ECU

Tap a brand: the ECU pages of that brand with a verified solution for this operation open.

Operations

More from the software

Stage 1More power and torque, with a sharper response to the throttle.Stage 2A further-reaching calibration for vehicles with upgrades such as exhaust or intercooler.Vmax OffThe factory top-speed limit is lifted in the software.Pop & BangA calibration that brings exhaust pops and bangs when you lift off.

You can do this operation yourself in Studio

Studio's Ready solutions section first tries a suitable option for your file's ECU family against your file, then applies the one you pick. Or adjust the maps yourself in Hex, Table, 2D and 3D view.

Take a look at the ECU software →

Questions

Frequently asked questions

How is a Torque Limiter Off file made?

The flow: upload the original ECU read → the software identifies the unit from the file and shows only the options that work on it → the operation you choose is prepared and checked before delivery → credit is used only when a result is delivered. Checksum runs in a separate tab.

Which ECUs support Torque Limiter Off?

The full list of ECU families with verified solutions is on this page by vehicle type.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account