Skip to content

ECU family · Car

DELPHI DCM3.5 — Stage 1, DPF Off, EGR Off, AdBlue / SCR Off Solutions

The DELPHI DCM3.5 ECU is used in car vehicles from brands such as CITROEN, DS, FORD, PEUGEOT, TOYOTA. The RemapCloud library holds verified solution files for this ECU family.

Upload your file freeSee operations
Free pre-checkECU recognition and the options that work on your file, without spending credit
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Performance

Expected Stage 1 gains

+20–30%power gain
+25–35%torque gain
Turbo dieselengine type

This is an expected range; the real figure depends on the vehicle's hardware and the file. Compatibility is checked again when you upload.

Operations

Available operations for this ECU

Stage 1More power and torque, with a sharper response to the throttle.DPF OffRegeneration and DPF-related fault codes are turned off in the software.EGR OffEGR valve management and its fault codes are turned off in the software.AdBlue / SCR OffAdBlue/SCR dosing and its warnings are turned off in the software.included in the Full Emission packageFull Emission OffDPF, EGR and AdBlue/SCR handled together, in one file and one go.Vmax OffThe factory top-speed limit is lifted in the software.

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

Operations

DELPHI DCM3.5 operations in detail

DELPHI DCM3.5 Stage 1

A software calibration that gets more from the engine's power and torque maps within safe limits; RemapCloud prepares it for the exact file you read. Stage 1 is available for DELPHI DCM3.5 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Turbo diesel: +20–30% power gain, +25–35% torque gain.

By brand and ECU: FORD DELPHI DCM3.5 Stage 1 · TOYOTA DELPHI DCM3.5 Stage 1 · PEUGEOT DELPHI DCM3.5 Stage 1 · CITROEN DELPHI DCM3.5 Stage 1

Stage 1: all supported ECU families

DELPHI DCM3.5 Vmax Off

Vmax off (speed limiter removal) software: upload your ECU file, pick, download. Vmax Off is available for DELPHI DCM3.5 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: PEUGEOT DELPHI DCM3.5 Vmax Off

Vmax Off: all supported ECU families

Brands

Brands using this ECU

FORDCar · Stage 1, DPF Off, EGR Off +1PEUGEOTCar · Stage 1, DPF Off, EGR Off +2TOYOTACar · Stage 1, DPF OffCITROENCar · Stage 1, Full Emission Off
DSCar · —

How it works

How it works

Upload

Upload the original ECU read

Select

The software identifies the unit from the file and shows only the options that work on it

Process

The operation you choose is prepared and checked before delivery

Download & Checksum

Credit is used only when a result is delivered. Checksum runs in a separate tab.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.

Upload your file for free — see which operations work

Explore

Related ECU families

DelphiDCM6.2ABoschEDC16BoschEDC16C39BoschEDC16C34BoschEDC17C10BoschMED17BoschMD1CS003ContinentalSID807BoschEDC17C60ContinentalSID807EVODelphiDCM3.7DelphiDCM3.4DelphiDCM3.7APDelphiDCM3.3 / DCM3.3+

Questions

Frequently asked questions

Can Stage 1 be done on DELPHI DCM3.5?

Yes. The RemapCloud library has a verified Stage 1 solution for DELPHI DCM3.5. When you upload your original file, compatibility is measured at hex level.

Can DPF Off be done on DELPHI DCM3.5?

Yes. The RemapCloud library has a verified DPF Off solution for DELPHI DCM3.5. When you upload your original file, compatibility is measured at hex level.

Can EGR Off be done on DELPHI DCM3.5?

Yes. The RemapCloud library has a verified EGR Off solution for DELPHI DCM3.5. When you upload your original file, compatibility is measured at hex level.

Can AdBlue / SCR Off be done on DELPHI DCM3.5?

Yes. The RemapCloud library has a verified AdBlue / SCR Off solution for DELPHI DCM3.5 (included in the Full Emission package). When you upload your original file, compatibility is measured at hex level.

Which brands use the DELPHI DCM3.5 ECU?

FORD, PEUGEOT, TOYOTA, CITROEN, DS, in car vehicles. The links in the brand table lead to each brand's own list of operations.

How many credits does a DELPHI DCM3.5 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account