Skip to content

ECU family · Car

CONTINENTAL SIEMENS-VDO SIMOS 8.3 — Stage 1, Stage 2, Decat / Catalyst Off Solutions

The CONTINENTAL SIEMENS-VDO SIMOS 8.3 ECU is used in car vehicles from brands such as AUDI. The RemapCloud library holds verified solution files for this ECU family.

Upload your file freeSee operations
Free pre-checkECU recognition and the options that work on your file, without spending credit
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Performance

Expected Stage 1 gains

+15–25%power gain
+15–25%torque gain
Petrol (turbo engines)engine type

This is an expected range; the real figure depends on the vehicle's hardware and the file. Compatibility is checked again when you upload.

Operations

Available operations for this ECU

Stage 1More power and torque, with a sharper response to the throttle.Stage 2A further-reaching calibration for vehicles with upgrades such as exhaust or intercooler.Decat / Catalyst OffCatalyst monitoring and its fault codes are turned off in the software.

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

Operations

CONTINENTAL SIEMENS-VDO SIMOS 8.3 operations in detail

CONTINENTAL SIEMENS-VDO SIMOS 8.3 Stage 1

A software calibration that gets more from the engine's power and torque maps within safe limits; RemapCloud prepares it for the exact file you read. Stage 1 is available for CONTINENTAL SIEMENS-VDO SIMOS 8.3 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Petrol (turbo engines): +15–25% power gain, +15–25% torque gain.

By brand and ECU: AUDI CONTINENTAL SIEMENS-VDO SIMOS 8.3 Stage 1

Stage 1: all supported ECU families

CONTINENTAL SIEMENS-VDO SIMOS 8.3 Stage 2

Stage 2 remap / Stage 2 tune software for hardware-upgraded engines: upload, pick, download. Stage 2 is available for CONTINENTAL SIEMENS-VDO SIMOS 8.3 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: AUDI CONTINENTAL SIEMENS-VDO SIMOS 8.3 Stage 2

Stage 2: all supported ECU families

CONTINENTAL SIEMENS-VDO SIMOS 8.3 Decat

Decat (catalyst off / cat delete) software: upload your ECU file, pick, download. Decat is available for CONTINENTAL SIEMENS-VDO SIMOS 8.3 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

By brand and ECU: AUDI CONTINENTAL SIMOS8.3 Decat

Decat: all supported ECU families

Brands

Brands using this ECU

AUDICar · Stage 1, Stage 2, Decat / Catalyst Off

Other ECU versions in this family

AUDI CONTINENTAL SIEMENS-VDO SIMOS 8.3

How it works

How it works

Upload

Upload the original ECU read

Select

The software identifies the unit from the file and shows only the options that work on it

Process

The operation you choose is prepared and checked before delivery

Download & Checksum

Credit is used only when a result is delivered. Checksum runs in a separate tab.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.

Upload your file for free — see which operations work

Explore

Related ECU families

SiemensPCR2.1ContinentalSIMOS 18ContinentalSIMOS10.2XContinentalSIMOS 3ContinentalSIMOS 10ContinentalSIMOS 12ContinentalSIMOS 7ContinentalSIMOS 8ContinentalSIMOS 19ContinentalSIMOSContinentalSIEMENS-VDO SIMOS 8.5ContinentalSIEMENS-VDO SIMOS 8.2ContinentalSIEMENS-VDO SIMOS 8.41ContinentalSIEMENS-VDO HDEP MCM

Questions

Frequently asked questions

Can Stage 1 be done on CONTINENTAL SIEMENS-VDO SIMOS 8.3?

Yes. The RemapCloud library has a verified Stage 1 solution for CONTINENTAL SIEMENS-VDO SIMOS 8.3. When you upload your original file, compatibility is measured at hex level.

Can DPF Off be done on CONTINENTAL SIEMENS-VDO SIMOS 8.3?

There is currently no verified DPF Off solution for CONTINENTAL SIEMENS-VDO SIMOS 8.3 in the library. You can leave a request in the box on this page; it is recorded and the solution appears on this page when added.

How many credits does a CONTINENTAL SIEMENS-VDO SIMOS 8.3 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account