Skip to content

Car · BOSCH EDC17C56

BMW BOSCH EDC17C56 — Stage 1, DPF Off, EGR Off, AdBlue / SCR Off Solutions

Verified solutions from the library for BMW BOSCH EDC17C56. Upload your file: the ECU is identified from the file itself and you see the applicable operations without spending credits.

Free pre-checkECU recognition and the options that work on your file, without spending credit
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Performance

Expected Stage 1 gains

+20–30%power gain
+25–35%torque gain
Turbo dieselengine type

This is an expected range; the real figure depends on the vehicle's hardware and the file. Compatibility is checked again when you upload.

Operations

Available operations for this ECU

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

ECU familyBOSCH EDC17C56BrandBMW

Operations

BMW BOSCH EDC17C56 operations in detail

BMW BOSCH EDC17C56 Stage 1

A software calibration that gets more from the engine's power and torque maps within safe limits; RemapCloud prepares it for the exact file you read. Stage 1 is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file. Turbo diesel: +20–30% power gain, +25–35% torque gain.

Stage 1: all supported ECU families

BMW BOSCH EDC17C56 DPF Off

Turning off diesel particulate filter (DPF) management and its fault codes in the ECU software; the software shows up front whether your file supports it. DPF Off is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

DPF Off: all supported ECU families

BMW BOSCH EDC17C56 EGR Off

Switching off exhaust gas recirculation (EGR) valve control and its fault codes in the ECU software; whether it suits your file is shown once you upload. EGR Off is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

EGR Off: all supported ECU families

BMW BOSCH EDC17C56 Full Emission Off

A package that switches off emission systems such as DPF, EGR and AdBlue/SCR together in one file. Full Emission Off is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Full Emission Off: all supported ECU families

BMW BOSCH EDC17C56 Stage 2

Stage 2 remap / Stage 2 tune software for hardware-upgraded engines: upload, pick, download. Stage 2 is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Stage 2: all supported ECU families

BMW BOSCH EDC17C56 DTC Off

Removing selected diagnostic trouble codes (DTC) in the ECU software. DTC Off is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

DTC Off: all supported ECU families

BMW BOSCH EDC17C56 Vmax Off

Vmax off (speed limiter removal) software: upload your ECU file, pick, download. Vmax Off is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Vmax Off: all supported ECU families

BMW BOSCH EDC17C56 Pop & Bang

Pops & bangs (pop and bang / crackle map) software: upload your ECU file, pick, download. Pop & Bang is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Pop & Bang: all supported ECU families

BMW BOSCH EDC17C56 Stage 3

Stage 3 remap / Stage 3 tune software for extensive hardware changes such as a bigger turbo. Stage 3 is available for BMW BOSCH EDC17C56 with a verified solution in the library: upload your original file and the software enables it only if it fits your file.

Stage 3: all supported ECU families

Explore

Other ECUs for BMW

How it works

How it works

Upload

Upload the original ECU read

Select

The software identifies the unit from the file and shows only the options that work on it

Process

The operation you choose is prepared and checked before delivery

Download & Checksum

Credit is used only when a result is delivered. Checksum runs in a separate tab.

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.

Upload your file for free — see which operations work

Questions

Frequently asked questions

Can Stage 1 be done on a BMW BOSCH EDC17C56?

Yes. The library holds a verified Stage 1 solution for BMW BOSCH EDC17C56. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can DPF Off be done on a BMW BOSCH EDC17C56?

Yes. The library holds a verified DPF Off solution for BMW BOSCH EDC17C56. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can EGR Off be done on a BMW BOSCH EDC17C56?

Yes. The library holds a verified EGR Off solution for BMW BOSCH EDC17C56. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can AdBlue / SCR Off be done on a BMW BOSCH EDC17C56?

Yes. The library holds a verified AdBlue / SCR Off solution for BMW BOSCH EDC17C56 (included in the Full Emission package). When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

How many credits does a BMW BOSCH EDC17C56 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account