Skip to content

Car · BOSCH EDC16CP39

FIAT BOSCH EDC16CP39 — Stage 1, DPF Off, EGR Off, AdBlue / SCR Off Solutions

Verified solutions from the library for FIAT BOSCH EDC16CP39. Upload your file: the ECU is identified from the file itself and you see the applicable operations without spending credits.

Upload your file freeSee operations
Free pre-checkECU identification and applicable operations without credits
No result, no chargeCredit is used only on delivery
Verified outputUncertain results are clearly labelled
RemapChecksumChecksum correction in its own tab

Performance

Typical Stage 1 gains

+20–30%power gain
+25–35%torque gain
Turbo dieselengine type

Typical range; the exact figure depends on the vehicle's hardware and the file. Compatibility is measured at hex level when you upload it.

Operations

Available operations for this ECU

Stage 1Typical gains in power and torque with a livelier throttle response.DPF OffRegeneration cycles and DPF fault codes are disabled in the software.EGR OffEGR valve control and related fault codes are switched off in the software.AdBlue / SCR OffAdBlue/SCR dosing and its related warning functions are switched off in the software.included in the Full Emission packageFull Emission OffDPF, EGR and AdBlue/SCR are switched off together in one file, in one job.Stage 2Advanced calibration matched to hardware upgrades such as exhaust or intercooler.DTC OffOnly the selected fault codes are removed; other diagnostic functions stay in place.Vmax OffThe factory speed limiter is removed in the software.Decat / Catalyst OffCatalyst monitoring and related fault codes are switched off in the software.TVA OffThrottle valve actuator (TVA) control and related fault codes are switched off in the software.Immo OffSoftware solution for immobiliser-related no-start problems.

Operations on emission systems are offered only for use permitted by local law (e.g. off-road / motorsport / export); responsibility lies with the user.

ECU familyBOSCH EDC16C39BrandFIAT

Brands

Other brands using this ECU

LAND ROVERCarFORDCarPEUGEOTCarCITROENCarMITSUBISHICar

Explore

Other ECUs for FIAT

MarelliMJD9 (ALL)BoschEDC16C39BoschMED17BoschEDC16BoschEDC17C49BoschEDC15C2BoschEDC15C7BoschEDC17C10BoschEDC16C8BoschEDC17C66BoschEDC17C69BoschEDC17C79BoschEDC15C6BoschEDC17C84

How it works

How it works

Upload

Upload your original ECU file

Select

The system detects the ECU from the file and enables only genuinely applicable solutions

Process

The solution is verified at hex level and applied

Download & Checksum

Credit is charged only on successful delivery. The checksum is corrected in a separate tab with the built-in RemapChecksum.

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Missing the operation you need? Leave a request

Brand and ECU are pre-filled; add the missing operation as a note. The most requested ECUs get solutions first. Your request is recorded; when a solution is added it appears on this page.

Upload your file for free — see which operations work

Questions

Frequently asked questions

Can Stage 1 be done on a FIAT BOSCH EDC16CP39?

Yes. The library holds a verified Stage 1 solution for FIAT BOSCH EDC16CP39. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can DPF Off be done on a FIAT BOSCH EDC16CP39?

Yes. The library holds a verified DPF Off solution for FIAT BOSCH EDC16CP39. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can EGR Off be done on a FIAT BOSCH EDC16CP39?

Yes. The library holds a verified EGR Off solution for FIAT BOSCH EDC16CP39. When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Can AdBlue / SCR Off be done on a FIAT BOSCH EDC16CP39?

Yes. The library holds a verified AdBlue / SCR Off solution for FIAT BOSCH EDC16CP39 (included in the Full Emission package). When you upload the original file, compatibility is measured at hex level; the checksum is corrected in a separate tab with RemapChecksum.

Which brands use the BOSCH EDC16CP39 ECU?

Besides FIAT it is also found on LAND ROVER, FORD, PEUGEOT, CITROEN, MITSUBISHI; the solution list for each brand is on its own page.

How many credits does a FIAT BOSCH EDC16CP39 job cost?

A module job costs 1 credit and Stage 1 costs 2 credits; no credit is charged if no result is delivered. Stage 1 + 1 module costs 3 credits; each further module +1 credit.

Upload your first file.

Opening an account is free. Upload your file and see the applicable Stage 1, DPF, EGR and AdBlue operations before spending a credit.

Create free account